Ulterra Wont Stow. Minn Kota Ulterra Manual Stow You don't always have to take your trolling motor in for repairs If your Ulterra or Riptide Ulterra motor does not properly position the motor lower unit in the "park" position when stowing, you may need to do a Stow Reset.
Minn Kota Ulterra Pro Fishing Supply from www.profishingsupply.com
Hopefully, you won't have to deal with any calibration errors, and the unit will work perfectly on the new system. You don't always have to take your trolling motor in for repairs
Minn Kota Ulterra Pro Fishing Supply
I ended up searching the internet, and found the info Eyefish posted, and was able to get the motor stowed You don't always have to take your trolling motor in for repairs If your Minn Kota Ulterra fails to trim or stow properly, use this simple procedure to recalibrate those functions
Minn Kota Ulterra Manual Stow. Here are the steps on how to manually stow a Minn Kota Ulterra: Power off the motor.Lift up on the trim housing until the shaft and trim housing can be pulled up by hand.While the trim housing and shaft are lifted up, release the latch pin bracket.Rotate the shaft and trim housing in and down towards the stowed position.Pull the lower unit onto the mount ramps. If your Minn Kota Ulterra fails to trim or stow properly, use this simple procedure to recalibrate those functions
Minn Kota Ulterra Manual Stow. Locate the stow/deploy switch on the bow mounted control unit If your Ulterra or Riptide Ulterra motor does not properly position the motor lower unit in the "park" position when stowing, you may need to do a Stow Reset.